ChemFlux- 2D Gallery - Waste
Containment Problems
| Plug Flow |
preprocessor |
postprocessor |
This
example shows the flow of a plug of contamination released at ground
surface for a time duration. Results are benchmarked against MT3D.
Model setup time: 2.5 hrs
Solution time: 6 min 13 seconds on PIII-1.0 GHz |
| Clay Dam |
preprocessor |
postprocessor |
This
example shows the calculation of contaminant movement through a
clay dam.
Model setup time: 14 minutes
Solution time: 9 seconds on PIII-1.0 GHz |
| Earth Dam |
preprocessor |
postprocessor |
Calculation
of contaminant movement when a contaminant source is applied to
the face of a dam.
Model setup time: 7 minutes
Solution time: 10 seconds on PIII-1.0 GHz |
|
