Find: models matching tag: Max per page:   
Text:   
Back to Gallery

2DPoster

Calculation of multiple bearing capacities in a multi-layer system.

Model filename: Foundations > 2DPoster.svm

Tags: Foundations,SVSOLID,2D,Steady-State,Water Table,Linear Elastic,SVSOLID Consider PWP,Foundation design / settlement,Foundations

Attachments:

Basement

Modeling of a typical basement design. Use of features is shown. Input time 7 minutes.

Model filename: Foundations > Basement.svm

Tags: Foundations,SVSOLID,2D,Steady-State,Linear Elastic,SVSOLID Neglect PWP,Foundation design / settlement,Foundations

Attachments:

Basement3D

Will examine the stress due to the weight of a basement.

Model filename: Foundations > Basement3D.svm

Tags: Foundations,SVSOLID,3D,Steady-State,Linear Elastic,SVSOLID Neglect PWP,Foundation design / settlement,Foundations

Attachments:

Bearing

Typical bearing problem. Input time = 17 minutes.

Model filename: Foundations > Bearing.svm

Tags: Foundations,SVSOLID,2D,Steady-State,Linear Elastic,SVSOLID Neglect PWP,Foundation design / settlement,Foundations

Attachments:

FlatBearing

Flat bearing capacity. Ko-Loading is used to define the in-situ stress conditions. It is assumed that the concrete slab is already present for in-situ conditions. Then a load is applied to the concrete.

Model filename: Foundations > FlatBearing.svm

Tags: Foundations,SVSOLID,2D,Steady-State,Linear Elastic,SVSOLID Neglect PWP,Foundation design / settlement,Slab foundations,Foundations,Slab on Ground

Attachments:

FloorLeak

This tutorial example examines a leak in the basement floor. There are concerns that vapors from contaminated soil nearby may enter the basement.

Model filename: Foundations > FloorLeak.svm

Tags: Foundations,SVAIRFLOW,3D,Steady-State,Contaminant transport,Geoenvironmental,Contaminant Migration,Foundations,Foundation design / settlement

Attachments:

FootingHeat

The purpose of this model is to calculate the zone of influence around building and road structure foundations through the use of the plan view model.

Model filename: Foundations > FootingHeat.svm

Tags: Foundations,SVHEAT,Plan,Steady-State,Foundation design / settlement,Foundations

Attachments:

HeatedFoundTut3D

This 3D tutorial model demonstrates the steps to set up a simple 3D analysis. The temperature contours surrounding a basement are examined.

Model filename: Foundations > HeatedFoundTut3D.svm

Tags: Foundations,SVHEAT,3D,Steady-State,Foundation design / settlement,Foundations

Attachments:

HeatedPipe

Plan view analysis of footings on frozen soil. What are the effects of heating a pipeline near the footings.

Model filename: Foundations > HeatedPipe.svm

Tags: Foundations,SVHEAT,Plan,Steady-State,Pipe Design,Foundation design / settlement,Freeze / Thaw,Foundations,Arctic design

Attachments:

HouseFoundation

This model illustrates the use of the software to calculate heat interchanges between climate and the foundation of a house.The purpose of this model is to quantify the heat fluxes that enter into and exit from a house foundation.

Model filename: Foundations > HouseFoundation.svm

Tags: Foundations,SVHEAT,2D,Transient,Foundations,Foundation design / settlement

Attachments:

HouseFoundationSS

Example of the effect of climate on the floor slab of a house.

Model filename: Foundations > HouseFoundationSS.svm

Tags: Foundations,SVHEAT,2D,Steady-State,Foundations,Foundation design / settlement

Attachments:

PillarFoundationOnSlope

A 3D Tutorial Example Problem.This model computes the stress and displacement generated as a result of placing pillar foundation on a sloping ground surface. The circular pillar foundation has been placed at the mid-slope. The model is modeled using two regions, three surfaces, and two materials.

Model filename: Foundations > PillarFoundationOnSlope.svm

Tags: Foundations,Foundations,SVSOLID Neglect PWP,Linear Elastic,Steady-State,3D,SVSOLID

Attachments:

Round_Footing

In SVSOLID, the total stress analysis option has been selected, which means the pore water pressure is 0 kPa throughout the model.

Model filename: Foundations > Round_Footing.svm

Tags: Foundations,SVSOLID,Axisymmetric,Steady-State,Linear Elastic,SVSOLID Neglect PWP,Foundation design / settlement,Foundations,Benchmarking

Attachments:

Strip_Footing

This example shows the calculation of stresses beneath a strip footing foundation.

Model filename: Foundations > Strip_Footing.svm

Tags: Foundations,SVSOLID,2D,Steady-State,Linear Elastic,SVSOLID Neglect PWP,Foundation design / settlement,Foundations,Benchmarking

Attachments:

TBuildingHeated2

Plan view analysis of footings on frozen soil. Will the heating of a building unthaw the soil around the other footings.

Problem run for 3 hours.

Model filename: Foundations > TBuildingHeated2.svm

Tags: Foundations,SVHEAT,Plan,Transient,Foundations,Foundation design / settlement

Attachments:

TwoFootingsOnSlope

This 2D Tutorial example problem sets up a model of a simple slope with two foundation loads applied. A water table is present. The purpose of this model is to determine the stress conditions in the slope due to applied loads and the magnitude of displacement under each footing.

Model filename: Foundations > TwoFootingsOnSlope.svm

Tags: Foundations,Foundations,SVSOLID Consider PWP,Linear Elastic,Water Table,SVSOLID,Steady-State,2D

Attachments:

Water_Tank_Stresses

Examination of the stress contours generated by a water tank with two unique soil layers

Model filename: Foundations > Water_Tank_Stresses.svm

Tags: Foundations,SVSOLID,Axisymmetric,Steady-State,Linear Elastic,SVSOLID Neglect PWP,Foundation design / settlement,Foundations

Attachments:

Back to Gallery